Now In: TRUCKS → SUSPENSION → Sway Bar Kits → CHEVROLET - GMC Blazer, Pickup, C10, C20, C30, 2WD 1955-99
 | previous | up | next
|
CHEVROLET - GMC Blazer, Pickup, C10, C20, C30, 2WD 1955-99
 E-mail this product to a friend
One of the best ways to control body roll is to incorporate Swaybars into the design of the suspension, effectively providing a torsional spring, linking the right and left sides of the car. This provides the resistance required to reduce body roll. GM product engineers used Swaybars, primarily in the front on some vehicles with heavy-duty suspensions and even at the rear – first on high-speed police vehicles and later on performance models. However, because the relatively low loads anticipated due to the limited capabilities of the tires in that era, stock musclecar swaybars fall short when matched with today`s performance radial tires.
PST carries an extensive line of swaybars for most applications that are larger than stock and designed to greatly diminish body roll with today’s improved tires and result in greater control and cornering ability. Even if your musclecar was equipped with production swaybars, these larger than stock G-MAX® Sway Bars deliver a much higher rate than any of the stock pieces. PST is the source for the harware to match the higher cornering loads available from modern performance radials.
Note: When ordering you must carefully read all the application notes.
Year: 1955-99
| |
| | Front or Rear Polygraphite® Sway Bar 2wd (purchased separately) | | SKU: | TRSP01117A | | Description: | G-Max® Polygraphite® Front or Rear Sway Bar
Order today and improve your car's handling!
Must state: Size, and front or rear bar in the order notes.
Sizes Available:
1955-72 Front Bar 1 1/8", Rear Bar 7/8"
1973-91 Front Bar 1 1/8", Rear Bar 1"
1992-99 Rear Bar 1"
Note: 1973-99 Front Bar, Vehicle must be equipped with factory sway bar, some or all of the O.E. hardware must be reused. Rear Bar, Must state in the order notes, if muffler is positioned vertically or horizontally.
Additional charge for bars 1 1 /4" and larger, available front bar 1992-99.
Price per bar when purchased separately.
| | Price: | $189.00 | |
| | Front or Rear Original Performance Sway Bar 2WD (purchased separately) | | SKU: | TRSP01117B | | Description: | G-MAX® Original Performance Front or Rear Sway Bar
Order today and improve your car's handling!
Must state: Size, and front or rear bar in the order notes.
Sizes Available:
1955-72 Front Bar 1 1/8", Rear Bar 7/8"
1973-91 Front Bar 1 1/8", Rear Bar 1"
1992-99 Rear Bar 1"
Note: 1973-99 Front Bar, Vehicle must be equipped with factory sway bar, some or all of the O.E. hardware must be reused. Rear Bar, Must state in the order notes, if muffler is positioned vertically or horizontally.
Additional charge for bars 1 1 /4" and larger, available front bar 1992-99.
Price per bar when purchased separately.
| | Price: | $169.00 | |
| | Polygraphite® Performance Front 1 1/4" and larger bars (purchased separetely) | | SKU: | TRSP01117C | | Description: | G-MAX® Polygraphite® Performance Front 1 1/4" and Larger Bars
Order today and improve your car's handling!
Must state: Size, and front or rear bar in the order notes.
Sizes Available: 1992-99 Front Bar 1 1/4", 1 3/8"
Note: Vehicle must be equipped with factory sway bar, some or all of the O.E. hardware must be reused.
Price per bar when purchased separately.
| | Price: | $219.00 | |
| | Original Performance Front 1 1/4" and larger bars (purchased separately) | | SKU: | TRSP01117D | | Description: | G-MAX® Original Performance Front 1 1/4" and Larger Bars
Order today and improve your car's handling!
Must state: Size, and front or rear bar in the order notes.
Sizes Available: 1992-99 Front Bar 1 1/4", 1 3/8"
Note: Vehicle must be equipped with factory sway bar, some or all of the O.E. hardware must be reused.
Original rubber bushings.
Price per bar when purchased separately.
| | Price: | $199.00 | |
|
|
|
|
