 | previous | up | next
|
FORD - MERCURY Mustang 1964-82 Capri 1979-82
 E-mail this product to a friend
The value of sway bars, one of the best ways to control body roll is to incorporate sway bars into the design of the suspension, effectively providing a tensional spring, linking the right and left sides of the car. This provides the resistance required to reduce body roll. Ford/Mercury product engineers used sway bars, primarily in front on some vehicles with heavy-duty suspensions and even at the rear-first on high speed police vehicles and later on performance models. However, because the relatively low loads anticipated due to the limited capabilities of the tires in that era, stock muscle car sway bars fall short when matched with today's performance radial tires. PST carries an extensive line of sway bars for Ford/Mercury products that are designed to greatly reduce body roll with today's improved tires resulting in greater control and cornering ability. Even if your muscle car was equipped with production sway bars, G-MAX bars deliver a much higher rate than any of the stock pieces. PST is your source for suspension kits and parts to match the higher cornering loads available from modern performance radial tires.
Year: 1964-82
| |
| | Sway Bar - Polygraphite® Performance Bar (purchased separately) | | SKU: | FDSP00806A | | Description: | Sizes Available:
1964-66, Front Bar 7/8", 1", 1 1/8" Rear Bar 3/4", 7/8" 1"
1967-70, Front Bar 7/8", 1", 1 1/8", Rear Bar 3/4", 7/8"
1971-73, Front Bar 1", 1 1/8", Rear Bar 3/4", 7/8"
1974-78, Front Bar 1", Rear Bar 7/8"
1979-82, Front Bar 1 1/8", Rear Bar 3/4", 7/8"
Note: 1967-70 Front Bar Big block cars can only use 1" bar to avoid interference with the oil filter. 1974-78 Front Bar and Rear Bar: Vehicle must be equipped with a factory sway bar. 1979-82 Rear Bar: These sway bars do not replace the origianal bar, they work in conjunction with the original.
Must state size, and front or rear bar in the order notes.
Price Each When Purchased Separately | | Price: | $189.00 | |
| | Sway Bar - Original Performance Rubber Kit (purchased separately) | | SKU: | FDSP00806B | | Description: |
Sizes Available:
1964-66, Front Bar 7/8", 1", 1 1/8" Rear Bar 3/4", 7/8" 1"
1967-70, Front Bar 7/8", 1", 1 1/8", Rear Bar 3/4", 7/8"
1971-73, Front Bar 1", 1 1/8", Rear Bar 3/4", 7/8"
1974-78, Front Bar 1", Rear Bar 7/8"
1979-82, Front Bar 1 1/8", Rear Bar 3/4", 7/8"
Note: 1967-70 Front Bar Big block cars can only use 1" bar to avoid interference with the oil filter. 1974-78 Front Bar and Rear Bar: Vehicle must be equipped with a factory sway bar. 1979-82 Rear Bar: These sway bars do not replace the origianal bar, they work in conjunction with the original.
Must state size, and front or rear bar in the order notes.
Price Each When Purchased Separately | | Price: | $169.00 | |
| | Sway Bar (when purchased with a Front End Kit) | | SKU: | FDSP00806C | | Description: |
Sizes Available:
1964-66, Front Bar 7/8", 1", 1 1/8" Rear Bar 3/4", 7/8" 1"
1967-70, Front Bar 7/8", 1", 1 1/8", Rear Bar 3/4", 7/8"
1971-73, Front Bar 1", 1 1/8", Rear Bar 3/4", 7/8"
1974-78, Front Bar 1", Rear Bar 7/8"
1979-82, Front Bar 1 1/8", Rear Bar 3/4", 7/8"
Note: 1967-70 Front Bar Big block cars can only use 1" bar to avoid interference with the oil filter. 1974-78 Front Bar and Rear Bar: Vehicle must be equipped with a factory sway bar. 1979-82 Rear Bar: These sway bars do not replace the origianal bar, they work in conjunction with the original.
Must state size, and front or rear bar in the order notes.
Price Each when purchased with a Front End Kit only. | | Price: | $149.00 | |
|
|
